Description
- Two-part, gray silicone adhesive system
- Cures at room temperature or rapidly by applying heat in an oven or by a heat gun or lamp
- Does not require atmospheric moisture to cure
- No curing byproducts such as acetic acid or methyl alcohol
- Product available in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
- 1:1 Mix Ratio (Part A: Part B)
Applications
- Adhesive for bonding and sealing silicones to each other and other substrates such as metals and plastics
- For rapid production or prototyping due to a rapid cure
Product Details
| Property | Average Result |
|---|---|
| Cure System | Platinum |
| Extrusion Rate | 180 g/minute |
| Lap Shear | 145 psi (1 MPa) |
| Durometer | 45 Type A |
| Appearance | Dark Gray |
| Cure | 2 hours / 65 °C |
| Dielectric Strength | 825 volts/mil (32.18 kV/mm) |
| Elongation | 400 % |
| Mix Ratio | 1:1 |
| Specific Gravity | 1.17 |
| Stress at Strain | 525 psi / 200 % (3.62 MPa / 200 %) |
| Tear | 150 ppi (26.46 kN/m) |
| Tensile | 1,050 psi (7.24 MPa) |
| Work Time | 15 minutes |
| Comment | Primerless Adhesive;Gray, tough, fast cure adhesive. Will RTV. 145 psi (1.0 MPa), unprimed and 600 psi (4.1 MPa) primed (CF1-135) lap shear. |
Encapsulation Technology
Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.