Description
- One-Part, white, non-slumping silicone RTV
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- As a sealing, caulking, adhesive or potting material in electrical and space applications to provide protection of sensitive circuits including in connectors, switches and electrical components
- For sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material
- For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Cure System | Oxime |
| Rheology | Flowable / Self Leveling |
| Durometer | 40 Type A |
| Appearance | White |
| Cure | 7 days / RTV |
| Cure Type | RTV |
| Dielectric Strength | 1,180 volts/mil (46.02 kV/mm) |
| Elongation | 300 % |
| Extrusion Rate | 20 g/minute |
| Flow Rate | 0.7 in (17.78 mm) |
| Mix Ratio | 1 PART |
| Specific Gravity | 1.13 |
| Tack Free Time | 20 minutes |
| Tear | 60 ppi (10.58 kN/m) |
| Tensile | 700 psi (4.83 MPa) |
Encapsulation Technology
Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.